Effect of Ti, Zr and Hf addition on microstructure and properties of rapidly solidified Al-Mn-Fe alloy
PBN-AR
Instytucja
Instytut Metalurgii i Inżynierii Materiałowej im. Aleksandra Krupkowskiego Polskiej Akademii Nauk
Informacje podstawowe
Główny język publikacji
EN
Czasopismo
JOURNAL OF ALLOYS AND COMPOUNDS
ISSN
0925-8388
EISSN
Wydawca
ELSEVIER SCIENCE SA
DOI
Rok publikacji
2014
Numer zeszytu
Strony od-do
607-611
Numer tomu
615
Link do pełnego tekstu
Identyfikator DOI
Liczba arkuszy
0,38
Słowa kluczowe
EN
Quasicrystals; Rapid-solidification; Mechanical properties; Phase transitions
Streszczenia
Język
EN
Treść
In this work, the influence of alloying elements Ti, Zr and Hf on microstructure and properties of Al91Mn7Fe2 melt spun ribbons, strengthened with quasicrystalline particles was studied. It was found that Zr improves significantly the microhardness of the alloy in as spun state by precipitation of metastable L12–Al3Zr phase in matrix grains. Both Hf and Zr additions retain higher microhardness values after annealing at 673 K by formation of stable Al3X precipitates, even though the quasicrystalline phase being the main strengthening phase in the alloy starts to decompose. Comparison of the results from differential scanning calorimetry, thermo-mechanical analysis and microhardness measurements after annealing showed correlation between phase transformations and mechanical properties. Based on TEM studies, drop of microhardness and increase in Young’s modulus with temperature for all samples was attributed to significant change in samples microstructure, especially to decomposition of quasicrystalline particles and formation of different intermetallic phases.
Cechy publikacji
ORIGINAL_ARTICLE
Inne
System-identifier
669544
CrossrefMetadata from Crossref logo
Cytowania
Liczba prac cytujących tę pracę
Brak danych
Referencje
Liczba prac cytowanych przez tę pracę
Brak danych