Comparative Analysis of Welded and Adhesive Joints Strength Made of Acid-Resistant Stainless Steel Sheets
PBN-AR
Instytucja
Wydział Inżynierii Mechanicznej i Informatyki (Politechnika Częstochowska)
Informacje podstawowe
Główny język publikacji
en
Czasopismo
Advances in Science and Technology Research Journal (10pkt w roku publikacji)
ISSN
2080-4075
EISSN
2299-8624
Wydawca
Politechnika Lubelska
URL
Rok publikacji
2017
Numer zeszytu
Iss.4
Strony od-do
97-102
Numer tomu
Vol.11
Identyfikator DOI
Liczba arkuszy
Autorzy
(liczba autorów: 5)
Pozostali autorzy
+ 4
Słowa kluczowe
en
welded joints
strength
adhesive joints
acid resistant steel
Streszczenia
Język
en
Treść
The article presents the selected results of strength tests on the effectiveness of bonding high-alloy steel 1.4310. Sheet steel is one of the materials that are difficult to activate energy. Effective joining of it is difficult, requires selection of the appropriate bonding technology. The paper focuses on the comparative tests the shear strength of one-single lap welded and bonded joints. The welding process was performed 3 groups of samples TIG welding and argon, where the variable value of the welding process was current: 60A, 70A, 80A. The adhesion process was performed in 6 groups of samples which differed in the method of surface preparation and the type of the adhesive. Adhesive joints were made by using adhesive of epoxy resin and a hardener: Epidian 61/TFF at a mass ratio of 100:22 and Epidian 61/IDA at a mass ratio of 100:40. As a way of surface preparation applied 3 different, but simplified and environmentally friendly methods of surface preparation: degreasing with using cleaner Loctite 7061, abrasive machining with P320 and degreasing and grinding with abrasive T800 and degreasing were used. Make joints and curing the adhesive joints were carried out at ambient temperature. Analyzed the joints were tested destructive - which set out the shear strength, in accordance with DIN EN 1465 on the testing machine Zwick / Roell Z150. Based on the results of research it was found that better results were obtained for the maximum welded joints, but this result was similar to the maximum value of the strength of the adhesive bond.
Cechy publikacji
original-article
Inne
System-identifier
56702
CrossrefMetadata from Crossref logo
Cytowania
Liczba prac cytujących tę pracę
Brak danych
Referencje
Liczba prac cytowanych przez tę pracę
Brak danych