Mechanical characteristics of pine biomass of different sizes and shapes
PBN-AR
Instytucja
Instytut Agrofizyki im. Bohdana Dobrzańskiego Polskiej Akademii Nauk
Informacje podstawowe
Główny język publikacji
angielski
Czasopismo
European Journal of Wood and Wood Products
ISSN
0018-3768
EISSN
1436-736X
Wydawca
SPRINGER
DOI
URL
Rok publikacji
2019
Numer zeszytu
4
Strony od-do
593-608
Numer tomu
77
Identyfikator DOI
Liczba arkuszy
Autorzy
Pozostali autorzy
+ 2
Streszczenia
Język
angielski
Treść
In the present study, the mechanical properties of granular biomass of pine origin (sawdust, shavings, long shavings and pellets) were determined. The bulk and tapped densities were determined in a cylindrical chamber. The compacted density was measured, and the influence of the moisture content on this quantity was examined in a vane tester. The flowability and strength properties were determined using a direct shear tester (Jenike box) 210 mm in diameter and standard Schulze ring shear tester. The tests in the Jenike tester complied with the Eurocode 1 procedure for normal pressure (σn) of 15 and 30 kPa and speed of shearing of 0.17 mm s−1. Ring shear testing was conducted using a Schulze annular shear cell of 195 mm outer diameter. Tests were performed for 10 and 20 kPa pre-shear σn. A prototype vane tester was constructed for determining the torque, shear strength, and relaxation of a consolidated sample of granular biomass. σn was exerted by a pneumatic system with a rubber air spring and yoke. The torque and density were measured for moisture content in the range of 10–50% and for σn in the range of 5–30 kPa. The torque was observed to be affected by σn and the moisture content, whereas no relation-ship between the torque and the rotational speed was observed
Inne
System-identifier
PX-5cd00024d5de7b3727be063e
CrossrefMetadata from Crossref logo
Cytowania
Liczba prac cytujących tę pracę
Brak danych
Referencje
Liczba prac cytowanych przez tę pracę
Brak danych